SkyStars F7 + KO45 3-6S BLHeli_32 4-in-1
The SkyStars F7+ KO45 Blheli_32 Fly Tower Stack features the SkyStars F7 HD flight controller, as well as the KO45 45A 4-in-1 ESC to give your multirotor full power!
Note: There is no difference in appearance between the 45A and 60A ESC, which can be distinguished from the MOS tube
Skystars KO45 45A BLHELI_32 4-in-1 30X30 ESC:
Excellent over-current capability
By adopting the best PCB material and PCB production process. Such as application of high TG materials, 3oz copper PCB & 2μm gold deposition process on PCB. Together with a 6-layer layout design of the board, compared with others that commonly use 4 layers, allowing it to withstand higher current.
Extreme stability and support of 6S LiPo battery
By use of 24 pcs of new Toshiba standard 40V 5x6 Mosfet & electronics imported from USA and Japan. Plus advanced lead-free SMT Processing technology. It makes ESC fully support the 6s battery and get better performance.
Better Control Performance
Flashed with the latest BLHeli_32 firmware in factory, support telemetry functions (including voltage, RPMS, & current)
Mounting Holes: 30.5*30.5mm/¦µ3mm
Supports 3-6S Lipo input
BB21 MCU, 48Mhz Runs BLHELI 16.X Firmware
Current sensor: YES
Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
Target: Q-H-30 BLS 16.7
MOS tube model is QN3019M6
SkyStars F7 F722 Flight Controller:
Brand Name: Skystars
Model: F722 HD
Item Name: F7 OSD 3-6S Flight Controller
MCU: STM32F722RGT6 216MHz
IMU: MPU6000 (SPI)
OSD: Betaflight OSD & DJI HD OSD (UART6)
BEC Output: 5V 3A & 10V 3A
Input Voltage: 3-6S Lipo
Firmware: SKYSTARS F7HD
6 hardware UARTS (UART1,2,3,4,6)
Mounting Holes: Standard 30.5mm square to the center of holes