Nazgul Evoque F5 V2 6S DJI O3 HD GPS
zoom_out_map
chevron_left chevron_right

Nazgul Evoque F5 V2 6S DJI O3 HD GPS

  • TBS CROSSFIRE NANO RX (SE)
  • DJI-PNP
  • Deadcat DC
649,00 CHF TTC 602,60 CHF (HT)
TTC
new_releases Pre-Order

Nazgul Evoque F5 V2 6S DJI O3 HD GPS - TBS

 

Our best pre-built drone just got better! Another breakthrough in FPV visuals from DJI with our upgraded frame and electronics.

A new standard of Bind-And-Fly drones that are simple to get started with but the durability and performance for enthusiasts. Welcome to the iFlight experience!

 

Features:

 

Smooth and Powerful XING2 Motors

 

The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection.

 

Latest Nazgul Frame for Maximum Protection

 

The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts.

 

DJI O3 HD Air Unit Low-Latency digital transmission

 

Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI)

4K Stabilized Video with 155° Ultra-Wide Angle

Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI)

 

Secured Battery Plug with Anti-Spark Filter

 

Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage.

 

Specially Designed Heatsink for DJI O3 HD Air Unit

 

Improved cooling performance for the high power draw of the DJI O3 video transmitter. We’ve added a custom CNC heatsink for excellent heat dissipation without overheating, even on high power levels.

 

Spécifications:

 

Product Name: Evoque F5 V2

FC: BLITZ Mini F722 Flight Controller

ESC: BLITZ Mini E55 4-IN-1 2-6S 55A ESC

Video Transmission: DJI O3 Air Unit

Frame wheelbase: 225mm (Squashed X) / 223 mm (DeadCat)

Motor: XING2 2207 motors

Prop: Nazgul 5 inch propellers

Weight:445grams

Takeoff Weight:Approx. 610 g

Dimensions (L×W×H):180×180×80 mm

Diagonal Distance:120 mm

Max Speed:27 m/s (Manual Mode)

Maximum Takeoff Altitude:5000 m

Max Hover Time:Approx. 8 mins

Max Flight Distance:5 km

Max Wind Speed Resistance:100 Km/H (Level 5)

Operating Temperature Range:-10° to 40° C (14° to 104° F)

Antennas:Dual Antennas

GNSS:Optional(GPS + Galileo)

 

Video Transmission:

  

Product Name:DJI O3 Air Unit

Communication Frequency:2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX)

Communication Bandwidth: Max 40 MHz

Live View Quality and Latency

 

With DJI FPV Goggles V2:

 

810p/120fps Video Transmission Quality: The video transmission latency is lower than 28 ms.

810p/60fps Video Transmission Quality: The video transmission latency is lower than 40 ms.

 

With DJI Goggles 2:

 

1080p/100fps Video Transmission Quality: The video transmission latency is as low as 30 ms.

1080p/60fps Video Transmission Quality: The video transmission latency is as low as 40 ms.

Max Video Transmission Bitrate:50 Mbps

Max Video Transmission Range:10 km (FCC), 2 km (CE), 6 km (SRRC)

Audio Transmission:N/A

 

Packing List:

 

1 x Evoque F5 6S HD BNF with GPS installed

2 x Antennas

1 x Battery pad

2 x propeller(Pairs)

 

Support GoPro non inclus

 

Recommended (optional):

 
1x Radiocommande
1x DJI FPV Goggle V2
1x Batterie 1300 - 1800mah 6S
1x Chargeur lipo 2S-6S
1x Support TPU pour Gopro 7 ou 8
  
 
 * Note importante : La réglementation Suisse impose une puissance maximum de 25mW  dans la fréquence des 5,8 Ghz, ainsi qu'un pilotage en double commande pour pratiquer le vol en immersion (FPV). La responsabilité de Helifree RC ne peut être engagée pour toute utilisation de ce matériel hors du strict cadre légal est sans licence adéquate
F013382
1 kg
0 Produits
Vous aimerez aussi