ELRS Micro TX Module 2.4Ghz
The black version with maximum 1W RF output power is released now. Support all 5D button dimensions based on BETAFPV ELRS V2.0.0 firmware. A new backpack function is added, allowing wireless communication between ExpressLRS, and other FPV related devices for command and control, or for querying config.
Note: Please make sure the VRX also supports backpack function when using the module VRX-backpack function. Backpack function will be added to the 500mW version in the future.
Below is the diagram for ELRS 2.4G 1W version
Note: Please assemble the antenna before power on. Otherwise, the PA chip in the Micro TX module will be damaged permanently.
Note: Please DO NOT use 3S or above battery to power up the TX module via XT30 port. Otherwise, the power supply chip in the TX module will be damaged permanently.
Note: Please do not turn on all DIP switches at the same time. You can refer to the chart to know about DIP switches on/off based on different uses.
1 * BETAFPV ELRS Micro TX module
1 * BETAFPV Moxon antenna (2.4G, 915MHz or 868MHz)
1 * Monopole antenna
1 * Micro TX module user manual
1 * Spare USB data cable (Type-A to Type-C)