Nazgul Evoque F7 O4 Pro 6S HD GPS Waterproof
Nazgul Evoque F7 O4 Pro 6S HD GPS Waterproof
Introducing the new 7-inch Nazgul Evoque—packed with 6 key upgrades for immersive long-range flights. It inherits the series' DC geometry, delivering cinematic shots free of prop obstruction.
Equipped with the DJI O4 Pro Air Unit, it supports seamless video capture and output, letting you capture unobstructed mountain and sea views effortlessly. Enjoy extended flight time to fly and create without limits.
Dualband Dual-Antenna, Enhanced Long-Range Stability:
With an optional ELRS dualband dual-antenna receiver, supporting simultaneous 2.4GHz + 900MHz communication. Paired with a dual-antenna, fan-shaped distributed layout for omnidirectional signal reception, it ensures stable, controlled long-range flights even in complex environments.
Upgraded Borg Stack:
The upgraded Borg Stack features a built-in anti-spark filter, dual independent BEC power supply (12V 2A with VTX switch + 5V 25A) for stable power, and a built-in polymer capacitor to extend device lifespan.
Fin-Shaped Cooling Channel:
The fin-shaped cooling channel design enhances heat dissipation and ensures stable long-range flight performance. It comes with Dynamic LED effects full of recognition and technological sense.
Flagship Recording Capability Equipped with DJI O4 Air Unit Pro:
Upgraded with a 1/1.3-inch image sensor, delivers remarkable performance in low-light and night environments. Capture low-altitude, high-speed flight footage in 4K resolution with an ultra-wide 155° FOV. Experience the immersive visual impact of flight like never before, with crisp 4K output that effortlessly meets your creative needs.
Specification:
Product Name: Nazgul Evoque F7 O4 6S HD
Geometry: Deadcat(DC)
FC: Borg Mini F7 Flight Controller
ESC: Borg 60R ESC
Video Transmission: DJI O4 Air Unit Pro
Frame: 321mm wheelbase
Motor: XING2 2809 1250KV motors
Prop: HQ 7.5X3X3 propellers
Weight: 765±5g(Without Battery)
Takeoff Weight: Approx. 1620±5g (incl. 21700 6S 10000mAh)
Dimensions (L×W×H): 284*283*53mm
Max Speed: 140km/h
Maximum Takeoff Altitude: 7000 m
Max Hover Time: Approx. 25min with 6S 8000-10000mAh battery No Load
Recommended load: 800g
Operating Temperature Range: -20° to 40° C
Antennas: Dual Antennas
GNSS: GPS+SBAS+Galileo+QZSS+Glonass
Receiver: iFlight ELRS 2.4GHz/868/900MHz Dualband Diversity RX
Video Transmission:
Product Name: DJI O4 Air Unit Pro
Image Sensor: 1/1.3-inch
Lens: FOV: 155°
ISO: 100-25600
Video Resolution: 1080p/100fps H.265
Video Format: MP4, Max Video Bitrate: 130Mbps
Color Mode: Normal Mode/D-Log M
Stabilization: RockSteady 3.0+ ; Stabilization function off (When RockSteady is enabled, the shooting angle only supports standard.)
Live View Quality: 1080P@100fps
Operating Frequency: 5.170-5.250 GHz & 5.725-5.850 GHz
Transmitter Power (EIRP): 5.1GHz＜23dBm(CE)/5.8GHz＜33dBm(FCC)/＜14dBm(CE)/＜30dBm(SRRC))
Max Video Transmission Range: With DJI Goggles 3/DJI Goggles N3: 15 km (FCC), 8 km (CE), 8 km (SRRC)
Communication Bandwidth: Max 60 MHz
Antenna: Dual antennas
Built-in Storage: 4GB
Supported SD cards: microSD (up to 512GB)
Operating Temperature: -10° to 40° C
Weight: Air Unit (camera module included): Approx. 32 g
Dimensions: Transmission Module: 33.5×33.5×13 mm (L×W×H)
Compatibility:
DJI Goggles 3 / DJI Goggles N3+ DJI FPV Remote Controller 3
DJI Goggles 2 / DJI Goggles Integra+ DJI FPV remote Controller 2
(Or another Radio to match the RX in the Drone)
The flight control firmware needs to be configured to support the SBUS protocol so that the DJI FPV remote controller can be used.
Packing List:
1 x Nazgul Evoque F7 O4 6S HD with GPS installed and waterproof
1 x Battery pad
2 x 7.5 inch Prop(Pairs)
2 x Battery strap
1. Waterproof Design & Maintenance
This drone features a sealed waterproof design, protecting internal components from splashes and short-term water contact. Splash and water resistance are non-permanent and may diminish with normal wear. To preserve waterproof integrity, do not open or modify the interior. Avoid high-pressure, high-velocity water or prolonged submersion to prevent damage.
2. Pre-Shipment Testing
Each unit undergoes comprehensive testing before shipment.
3. After-Sales Support for Damage/Crash
In case of damage or Crash, our team can provide maintenance advice, spare parts, or replacement options. Due to the waterproof seal, some internal repairs may be restricted, but we will always help you find the best solution.
