Pavo Pico Brushless Whoop Quadcopter
zoom_out_map
chevron_left chevron_right

Pavo Pico Brushless Whoop Quadcopter

VTX is not included

  • ELRS 2.4G
  • Support DJI O3
  • Support Walksnail/Vista
124,90 CHF TTC 115,54 CHF (HT)
TTC
check En Stock

Pavo Pico Brushless Whoop Quadcopter

 

Thanks to all the enthusiastic pilots who participated in the BETA TEST before, we've now released the smallest 2S about 100g DJI O3 Cinewhoop!

This ultra-light cinewhoop with a small wheelbase is not only equipped with 45mm propellers but the latest F4 2-3S 20A AIO FC V1 which greatly heightens the flying experience.

Due to Its split design HD VTX mounting bracket, it supports quick installation of mainstream HD digital VTX modules and a rubber damper vibration-damping design with GyroFlow stabilization software ensures stable and smooth HD images. Its design is well-suited for cruising indoors and outdoors alike.

 

We upgrade the FC board since the second batch, details are below:

 

Stable 9V 2A BEC power for the DJI O3 HD VTX, preventing disruptions caused by low battery voltage.

Improve ESC to 20A and a peak current of 25A, allowing it to handle special situations like motor blockage or stalling.

Connector for DJI O3 HD VTX and USB port for easy installation and maintenance.

 

Pavo Pico Brushless Whoop Quadcopter

 

Bullet Point:

 

The split-design HD VTX mounting bracket is compatible with popular models like DJI O3 Air Unit, Walksnail Avatar HD Pro, and Caddx Vista. The side bracket, rubber damper vibration-damping design, lens holder, and antenna have all been reinforced to suppress low-frequency vibration and enhance the safety of HD VTX, ensuring a stable output of high-definition videos. And simply connect the VTX cable and complete the binding process to start flying. 

To safeguard the DJI O3 camera lens and maintain consistent high-definition video output during flight, both a lens filter and a lens protection mount are included.

The battery slot and HD VTX mounting bracket duct height have been reduced to enhance the overall flying experience. DIY battery fixing methods are also supported, making them compatible with batteries of varying sizes and capacities.

The new F4 2-3S 20A AIO FC V1 upgrades from F4 1S 12A FC V3, weighs only 5.92 grams, and is optimized for HD digital VTX. Its improved computing power, high response speed, and stable flight make it an ideal choice for HD whoops.

The frame is constructed using PA12 material, known for its exceptional impact resistance and effortless installation process

 

Specification:

 

Items: Pavo Pico Brushless Whoop Quadcopter

Color: Black

Flight Time*: 4min

Wheelbase: 80.8mm

Battery: 2S 450mAh 45C

FC*: F4 1S 12A AIO FC V3(First batch), F4 2-3S 20A AIO FC V1(Since second batch)

Props: GF 45mm-3B black propeller

Motor: 1102 | 14000kv red and black (2022)

Weight (No Battery): 73.47g (DJI O3), 67.37g (Vista), 68.14g (Avatar)

Frame: Pavo Pico Brushless Whoop Frame

HD VTX: Support DJI O3 Air Unit, Caddx Vista Kit / RUNCAM Link / Walksnail Avatar HD Pro Kit installation. 

RX Version: Serial ELRS/TBS

FPV Camera: Support DJI O3 Camera, Caddx Series, RUNCAM Series 19mm/20mm Camera, Avatar HD Pro Camera

 

HD Digital VTX System:

 

Pavo Pico supports various types of HD VTX. DJI O3 and Walksnail Avatar Pro Kit both support HD digital VTX up to 1080P using dual-band transmission technology for better signal stability.

The Vista Kit supports digital signal transmission for HD video up to 720P, with low latency and superior image quality performance.

It's compact and lightweight, making it great for small drone installation, and compatible with various remote controls and monitors.

The customized HD VTX mounting bracket has a split design, making it effortless to install for pilots DIY, and explore more possibilities while ensuring HD image quality.

 

 

 d7d5e31dd5f81677e3b1a9e1ca4b719a_1024x1024.jpg?v=1687851578

 

Pavo Pico Brushless Whoop Quadcopter

Flight Controller:

 

We upgraded the FC from F4 1S 12A AIO FC V3 to F4 2-3S 20A AIO FC V1. The upgraded FC features an ESC with a pulse overcurrent capacity of 25A, ensuring stable operation of the flight controller even in the event of motor stalling.

The addition of a 9V 2A BEC power supply ensures the stable operation of the DJI O3 HD VTX when the battery voltage is low.

It also includes a DJI O3 6-pin PMU allowing for connection to HD VTX without soldering.

It integrates features such as a 16MB black box, with support for GPS, external receivers, and other devices. The redesigned solder pad layout and USB connector make installation and maintenance easier and more convenient.

 F4 2-3S 20A AIO FC V1

 

 

Power system:

 

The 1102 14000kv motor brings stronger power and lower noise, delivering abundant thrust and impressive speed that enable effortless execution of aerial maneuvers. Paired with the high-performance Gemfan 45mm propeller, this power system achieves superb balance, ensuring powerful lift and stable flight, while also providing precise and responsive control.

The combination of these power systems makes it an excellent choice for Pavo Pico, allowing pilots to easily accomplish filming tasks.

 

 

Carbon Fiber VTX Adapter:

 

We found that the installation dimensions of the Vista and Avatar HD Pro digital VTX modules closely match those of the O3 digital VTX.

Thus, Installing a carbon plate with mounting holes that measure 20x20mm is sufficient to mount both digital VTXs.

Install quickly and effortlessly, while meeting pilots' various DIY needs, and exploring more possibilities for flying.

 

 

Package:

 

1 * Pavo Pico Brushless Whoop Quadcopter (Without HD Digital VTX & Camera)

1 * 2S 450mAh Battery

4 * GF 45mm-3B Propellers

1 * USB Parameter Adjustment Cable

1 * 5.8G Copper Tube Antenna Package

1 * VTX Bracket Screw Package 2 * DJI O3 HD Digital VTX Antenna Mount

2 * DJI O3 HD Digital VTX Mounting Bracket

1 * VTX Mounting Plate (Vista/Avatar HD Digital VTX Version Only)

1 * DJI O3 Lens UV Protector (DJI O3 HD Digital VTX Version Only)

1 * DJI O3 Lens Protective Case (DJI O3 HD Digital VTX Version Only)

 

01010032_1
0.30 kg
4 Produits
Vous aimerez aussi