GEPRC MARK5 DC HD O3 6S FPV w/GPS

GEPRC MARK5 DC HD O3 6S FPV w/GPS

The HD VTX ushered in a new upgrade, and the brand new VTX of DJI O3 air unit pushed the digital system to a new level. The GEPRC team is also upgrading and optimizing the overall performance on the basis of MARK5. At the same time, it will be equipped with DJI O3 air unit to design the new MARK5 O3 version, the versions are MK5D and MK5X respectively.

The newly upgraded camera aluminum alloy side plate, 7075-T6 aluminum alloy is strong and durable. It can be fully adapted to DJI’s new O3 air unit camera, with a field of view (FOV) of 155°, and the recording specification can support up to 4K 60FPS. We also specially designed TPU fixing parts for the O3 VTX module, and equipped with air inlet cooling port, which is conducive to adequate heat dissipation at the air unit. MARK5 O3 uses GEPRC’s latest SPAN F722-BT-HD V2 stack, with ICM 42688P gyroscope for smooth flight, redundant performance and ports, and supports Bluetooth wireless connection for tuning. The SPAN BLHeli_32 50A ESC with GEPRC 2107.5 motor, and uses new Gemfan 5136 propellers, which has strong power. The DC structure has a wide and unobstructed viewing angle during flight, which is suitable for O3 internal video recording and direct output. MARK5 O3 is shipped with two different camera mounts, which can be mounted with a full range of GoPro action cameras, as well as Naked GoPro 8/10, Insta 360 GO2 and Caddx Peanut, etc. to record beautiful moments for your flight.

This time, MARK5 O3 will broaden your horizons, fly beyond what you have ever seen, and bring more possibilities for FPV creation.

Specifications:

Model: MARK5 DC HD O3 6S Quadcopter

Brand: GEPRC

Frame: GEP-MK5D O3/GEP-MK5X O3

Wheelbase: 225mm

Top plate: 2.5mm

Bottom plate: 2.5mm

Arm plate: 5mm

FC system: SPAN F722-BT-HD V2

MCU: STM32F722

Gyro: 42688-P(SPI)

OSD: BetaFlight OSD w/AT7456E chip

ESC: SPAN G50A BLHeli_32 4IN1 50A 4-6S ESC

VTX: DJI O3 Air Unit

Camera: DJI O3

Propeller: Gemfan 5136

Antenna: DJI O3 antenna

Motor: SPEEDX2 2107.5-1960KV (6S Version) / SPEEDX2 2107.5-2450KV（4S Version）

Weight: MK5D: 426.0g, MK5X: 404.9g(MARK5 HD O3 including 3D printed parts)

Receiver: PNP, Frsky R-XSR, TBS Nano RX, ELRS 2.4G

Recommended Battery: LiPo 4S 1300mAh-1800mAh (4S Version) / LiPo 6S 1050mAh-1550mAh(6S Version)

Includes:

1 x MARK5 DC HD O3 6S with GPS M10 installed from GEPRC Factory

4 x Gemfan 5136 propellers (pair)

1 x Battery strap M15x250mm

2 x Battery strap M20x220mm

2 x Battery Silicone Pads

1 x 3D printed parts

1 x Action cam mount holder

1 x Set of screws

1 x Set of screwdrivers

1 x Antenna fixed tube